DYNATRON/BONDO CORP -- 5264 LIGHTWEIGHT BODY FILLER  -- 8010-00F022206
<pre>=====================  Product Identification  =====================

Product ID:5264 LIGHTWEIGHT BODY FILLER
MSDS Date:03/09/1995
FSC:8010
NIIN:00F022206
=== Responsible Party ===
Company Name:DYNATRON/BONDO CORP
Address:3700 ATLANTA INDUSTRIAL PKY NW
City:ATLANTA
State:GA
ZIP:30331-1098
Country:US
Info Phone Num:800-241-3386/404-696-2730
Emergency Phone Num:404-696-2730/800-241-3386
CAGE:16522
=== Contractor Identification ===
Company Name:BONDO/MAR-HYDE CORP
Address:3700 ATLANTA INDUSTRIAL PKWY NW
Box:City:ATLANTA
State:GA
ZIP:30331
Country:US
Phone:404-696-2730
CAGE:16522

=============  Composition/Information on Ingredients  =============

Ingred Name:GLASS OXIDE, FIBER GLASS WOOL, LEAD BOROSILICATE GLASS
    ENAMEL FLUX
CAS:65997-17-3
Fraction by Wt: <50%

Ingred Name:VOLATILE ORGANIC CONTENT: 216 G/L
RTECS #:9999999VO

Ingred Name:DIETHYLENE GLYCOL, MALEIC ANHYDRIDE, PHTHALIC ANHYDRIDE
    POLYMER	*97-2*
CAS:26123-45-5
Fraction by Wt: <35%

Ingred Name:STYRENE, STYRENE MONOMER  (SUSPECTED ANIMAL/HUMAN
    CARCINOGEN BY IARC GROUP 2B)     *97-2*
CAS:100-42-5
RTECS #:WL3675000
Fraction by Wt: <18%
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:TALC (POWDER), (ASBESTOS FREE), TALCUM; HYDROUS MAGNESIUM
    SILICATE   (IARC - GROUP 3)    *97-2*
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: <50%
OSHA PEL:2 MG/CUM (RESP DUST)
ACGIH TLV:2 MG/CUM (RESP DUST)

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:YES	 OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: MAY CAUSE IRRITATION.
    INHALATION: VAPORS MAY CAUSE MUCOUS MEMBRANE & UPPER RESPIRATORY
    TRACT IRRITATION. REPEATED EXPOSURE TO HIGH CONCENTRATIONS OF VAPOR
    MAY CAUSE LIVER & KIDNEY DAMAGE.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:IRRITATION, DISCOMFORT.
Medical Cond Aggravated by Exposure:INDIVIDUALS W/CHRONIC RESPIRATORY
    CONDITIONS (ASTHMA, CHRONIC BRONCHITIS, EMPHYSEMA).

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/LARGE AMOUNTS OF WATER. SKIN: WASH THOROUGHLY
    W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. GIVE CPR/OXYGEN IF
    NEEDED. INGESTION: DON'T INDUCE VOMITING. OBTAIN MEDICAL ATTENTION
    IN AL L CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:90F (SEE SUPP)
Lower Limits:1.1
Upper Limits:6.1
Extinguishing Media:SMALL FIRES: CO2, DRY CHEMICAL. LARGE FIRES: FOAM,
    WATER FOG.
Fire Fighting Procedures:DENSE SMOKE SERIOUSLY LIMITS VISIBILITY. VENT
    SMOKE & USE GAS MASK/REMOTE AIR SUPPLY. WEAR MSHA/NIOSH APPROVED
    SCBA W/PROTECTIVE EQUIPMENT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE SOURCES OF IGNITION. INCREASE
    VENITLATION TO MAXIMIZE VAPOR DISPERSAL. DIKE TO PREVENT RUNOOF
    INTO SEWERS/WATERWAYS. MATERIAL MAY BE REMOVED BY SHOVELING,
    WIPING. SWEEP/CLEAN W/INERT MATERIALS  & PLACE IN CLOSED CONTAINER
    FOR DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL, DRY AREA. DON'T STORE
    IN DIRECT SUNLIGHT. USE W/ADEQUATE GENERAL & LOCAL EXHAUST
    VENTILATION TO MINIMIZE EXPOSURE TO VAPORS.
Other Precautions:BOND & GROUND CONTAINERS FOR TRANSFER OF PRODUCT TO
    PREVENT STATIC SPARKS. AVOID PROLONGED/REPEATED CONTACT W/SKIN &
    EYE CONTACT. STYRENE VAPORS ARE UNIHIBITED & MAY CAUSE BLOCKAGE OF
    VENTILATION VENT S DUETO POLYMERIZATION.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED ORGANIC VAPOR/DUST
    RESPIRATOR TO AVOID INHALATION OF EXCESSIVE AIR CONTAMINANTS.
Ventilation:LOCAL EXHAUST SHOULD BE USED TO CONTROL THE EMISSION OF AIR
    CONTAMINANTS. GENERAL DILUTION MAY REDUCE AIR CONCENTRATIONS
Protective Gloves:POLYVINYL ALCOHOL/POLYETHYLENE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:SAFETY SHOWERS & EYE WASH STATIONS.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
    REUSE. CLEAN HANDS W/SOAP & WATER AFTER EVERY USAGE.
Supplemental Safety and Health
THE PHYSICAL DATA INFORMATION IS FOR STYRENE.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:293F(SUPP)
Vapor Pres:5.2(SUPP)
Vapor Density:3.6(SUPP)
Spec Gravity:1.05-1.35
Evaporation Rate &amp; Reference:LESS THAN ETHER
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE PASTE W/STYRENE ODOR
Percent Volatiles by Volume:18

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, PEROXIDES, OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, ELECTRICAL EQUIPMENT, SPARKS, OPEN
    FLAME.
Hazardous Decomposition Products:CO, CO2, HYDROCARBONS, ORGANIC ACIDS.
Conditions to Avoid Polymerization:UNREGULATED CONTACT W/ORGANIC
    PEROXIDES, EXPOSURE TO HEAT, OPEN FLAME & PROLONGED STORAGE >100F.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
    REGULATIONS. IF DISCARDED, MATERIAL & CONTAINERS ARE CONSIDERED
    RCRA HAZARDOUS WASTES BASED ON THE CHARACTERISTIC OF IGNITABILITY.
    UN1866.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.